WiFiPort is the logical representation of wireless local area network communications hardware that conforms to the IEEE 802.11 series of specifications. It embodies properties at the lowest layers of a network stack, such as the antennas used for transmission and reception, the address permanently embedded into the hardware, and the operational bandwidth of the device.
CIM_WiFiPort - child subclasses in ROOT\virtualization\v2
{'Description':'The state requested for the element. This information will be placed into the RequestedState property of the instance if the return code of the RequestStateChange method is 0 ('Completed with No Error'), or 4096 (0x1000) ('Job Started'). Refer to the description of the EnabledState and RequestedState properties for the detailed explanations of the RequestedState values.','ModelCorrespondence':['CIM_EnabledLogicalElement.RequestedState'],'ValueMap':['2', '3', '4', '6', '7', '8', '9', '10', '11', '..', '32768..65535'],'Values':['Enabled', 'Disabled', 'Shut Down', 'Offline', 'Test', 'Defer', 'Quiesce', 'Reboot', 'Reset', 'DMTF Reserved', 'Vendor Reserved']}
{'Description':'May contain a reference to the ConcreteJob created to track the state transition initiated by the method invocation.'}
TimeoutPeriod
datetime
2
✓
-
{'Description':'A timeout period that specifies the maximum amount of time that the client expects the transition to the new state to take. The interval format must be used to specify the TimeoutPeriod. A value of 0 or a null parameter indicates that the client has no time requirements for the transition. If this property does not contain 0 or null and the implementation does not support this parameter, a return code of 'Use Of Timeout Parameter Not Supported' shall be returned.'}
{'Description':'The power state to set.','ValueMap':['1', '2', '3', '4', '5', '6'],'Values':['Full Power', 'Power Save - Low Power Mode', 'Power Save - Standby', 'Power Save - Other', 'Power Cycle', 'Power Off']}
Time
datetime
1
✓
-
{'Description':'Time indicates when the power state should be set, either as a regular date-time value or as an interval value (where the interval begins when the method invocation is received.'}
'Shall contain the maximum bandwidth relative to the current operating mode specified in PortType. For example, shall contain 11000000 if PortType contains 71 ("802.11b").'
'IEEE 802 EUI-48 MAC addresses, each formatted as twelve hexadecimal digits (for example, "010203040506"), with each pair representing one of the six octets of the MAC address in "canonical" bit order. (Therefore, the Group address bit is found in the low order bit of the first character of the string.)'
'IEEE 802 EUI-48 MAC address, formatted as twelve hexadecimal digits (for example, "010203040506"), with each pair representing one of the six octets of the MAC address in "canonical" bit order. (Therefore, the Group address bit is found in the low order bit of the first character of the string.)'
'The data rate at which the current PPDU (PLCP (Physical Layer Convergence Protocol) Protocol Data Unit) was received. This value is encoded in the first 4 bits of the PLCP header in each PLCP frame.'
'WiFiPort is the logical representation of wireless local area network communications hardware that conforms to the IEEE 802.11 series of specifications. It embodies properties at the lowest layers of a network stack, such as the antennas used for transmission and reception, the address permanently embedded into the hardware, and the operational bandwidth of the device.'