Win32_NetworkAdapterConfiguration, ROOT\CIMV2\ms_409

Description

The Win32_NetworkAdapterConfiguration class represents the attributes and behaviors of a network adapter. This class has been extended to include extra properties and methods that support the management of the TCP/IPprotocols (and are independent of the network adapter).

Win32_NetworkAdapterConfiguration methods

Win32_NetworkAdapterConfiguration has 41 methods (41 Local)

Name	Origin	Return
DisableIPSec	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
EnableDHCP	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
EnableDNS	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
EnableIPFilterSec	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
EnableIPSec	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
EnableStatic	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
EnableWINS	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
ReleaseDHCPLease	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
ReleaseDHCPLeaseAll	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
RenewDHCPLease	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
RenewDHCPLeaseAll	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetArpAlwaysSourceRoute	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetArpUseEtherSNAP	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDatabasePath	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDeadGWDetect	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDefaultTOS	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDefaultTTL	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDNSDomain	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDNSServerSearchOrder	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDNSSuffixSearchOrder	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetDynamicDNSRegistration	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetForwardBufferMemory	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetGateways	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetIGMPLevel	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetIPConnectionMetric	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetIPUseZeroBroadcast	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetIPXFrameTypeNetworkPairs	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetIPXVirtualNetworkNumber	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetKeepAliveInterval	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetKeepAliveTime	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetMTU	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetNumForwardPackets	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetPMTUBHDetect	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetPMTUDiscovery	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetTcpipNetbios	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetTcpMaxConnectRetransmissions	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetTcpMaxDataRetransmissions	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetTcpNumConnections	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetTcpUseRFC1122UrgentPointer	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetTcpWindowSize	Win32_NetworkAdapterConfiguration	uint32 {'out':True}
SetWINSServer	Win32_NetworkAdapterConfiguration	uint32 {'out':True}

Win32_NetworkAdapterConfiguration properties

Win32_NetworkAdapterConfiguration has 61 properties (58 Local, 3 Derived)

Name	Origin	CIMType
ArpAlwaysSourceRoute	Win32_NetworkAdapterConfiguration	11 [boolean]
ArpUseEtherSNAP	Win32_NetworkAdapterConfiguration	11 [boolean]
Caption	CIM_Setting	8 [string]
DatabasePath	Win32_NetworkAdapterConfiguration	8 [string]
DeadGWDetectEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
DefaultIPGateway	Win32_NetworkAdapterConfiguration	8 [string]
DefaultTOS	Win32_NetworkAdapterConfiguration	17 [uint8]
DefaultTTL	Win32_NetworkAdapterConfiguration	17 [uint8]
Description	CIM_Setting	8 [string]
DHCPEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
DHCPLeaseExpires	Win32_NetworkAdapterConfiguration	101 [datetime]
DHCPLeaseObtained	Win32_NetworkAdapterConfiguration	101 [datetime]
DHCPServer	Win32_NetworkAdapterConfiguration	8 [string]
DNSDomain	Win32_NetworkAdapterConfiguration	8 [string]
DNSDomainSuffixSearchOrder	Win32_NetworkAdapterConfiguration	8 [string]
DNSEnabledForWINSResolution	Win32_NetworkAdapterConfiguration	11 [boolean]
DNSHostName	Win32_NetworkAdapterConfiguration	8 [string]
DNSServerSearchOrder	Win32_NetworkAdapterConfiguration	8 [string]
DomainDNSRegistrationEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
ForwardBufferMemory	Win32_NetworkAdapterConfiguration	19 [uint32]
FullDNSRegistrationEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
GatewayCostMetric	Win32_NetworkAdapterConfiguration	18 [uint16]
IGMPLevel	Win32_NetworkAdapterConfiguration	17 [uint8]
key Index	Win32_NetworkAdapterConfiguration	19 [uint32]
InterfaceIndex	Win32_NetworkAdapterConfiguration	19 [uint32]
IPAddress	Win32_NetworkAdapterConfiguration	8 [string]
IPConnectionMetric	Win32_NetworkAdapterConfiguration	19 [uint32]
IPEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
IPFilterSecurityEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
IPPortSecurityEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
IPSecPermitIPProtocols	Win32_NetworkAdapterConfiguration	8 [string]
IPSecPermitTCPPorts	Win32_NetworkAdapterConfiguration	8 [string]
IPSecPermitUDPPorts	Win32_NetworkAdapterConfiguration	8 [string]
IPSubnet	Win32_NetworkAdapterConfiguration	8 [string]
IPUseZeroBroadcast	Win32_NetworkAdapterConfiguration	11 [boolean]
IPXAddress	Win32_NetworkAdapterConfiguration	8 [string]
IPXEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
IPXFrameType	Win32_NetworkAdapterConfiguration	19 [uint32]
IPXMediaType	Win32_NetworkAdapterConfiguration	19 [uint32]
IPXNetworkNumber	Win32_NetworkAdapterConfiguration	8 [string]
IPXVirtualNetNumber	Win32_NetworkAdapterConfiguration	8 [string]
KeepAliveInterval	Win32_NetworkAdapterConfiguration	19 [uint32]
KeepAliveTime	Win32_NetworkAdapterConfiguration	19 [uint32]
MACAddress	Win32_NetworkAdapterConfiguration	8 [string]
MTU	Win32_NetworkAdapterConfiguration	19 [uint32]
NumForwardPackets	Win32_NetworkAdapterConfiguration	19 [uint32]
PMTUBHDetectEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
PMTUDiscoveryEnabled	Win32_NetworkAdapterConfiguration	11 [boolean]
ServiceName	Win32_NetworkAdapterConfiguration	8 [string]
SettingID	CIM_Setting	8 [string]
TcpipNetbiosOptions	Win32_NetworkAdapterConfiguration	19 [uint32]
TcpMaxConnectRetransmissions	Win32_NetworkAdapterConfiguration	19 [uint32]
TcpMaxDataRetransmissions	Win32_NetworkAdapterConfiguration	19 [uint32]
TcpNumConnections	Win32_NetworkAdapterConfiguration	19 [uint32]
TcpUseRFC1122UrgentPointer	Win32_NetworkAdapterConfiguration	11 [boolean]
TcpWindowSize	Win32_NetworkAdapterConfiguration	18 [uint16]
WINSEnableLMHostsLookup	Win32_NetworkAdapterConfiguration	11 [boolean]
WINSHostLookupFile	Win32_NetworkAdapterConfiguration	8 [string]
WINSPrimaryServer	Win32_NetworkAdapterConfiguration	8 [string]
WINSScopeID	Win32_NetworkAdapterConfiguration	8 [string]
WINSSecondaryServer	Win32_NetworkAdapterConfiguration	8 [string]

Detailed description of Win32_NetworkAdapterConfiguration methods

Local methods (41) of Win32_NetworkAdapterConfiguration class

…

▲ DisableIPSec method
Return	uint32 {'out':True}
Description	'The DisableIPSec method is used to disable IP security on this TCP/IP-enabled network adapter. The method returns an integer value that can be interpretted as follows: 0 - Successful completion, no reboot required 1 - Successful completion, reboot required 64 - Method not supported on this platform 65 - Unknown failure 66 - Invalid subnet mask 67 - An error occurred while processing an Instance that was returned 68 - Invalid input parameter 69 - More than 5 gateways specified 70 - Invalid IP address 71 - Invalid gateway IP address 72 - An error occurred while accessing the Registry for the requested information 73 - Invalid domain name 74 - Invalid host name 75 - No primary/secondary WINS server defined 76 - Invalid file 77 - Invalid system path 78 - File copy failed 79 - Invalid security parameter 80 - Unable to configure TCP/IP service 81 - Unable to configure DHCP service 82 - Unable to renew DHCP lease 83 - Unable to release DHCP lease 84 - IP not enabled on adapter 85 - IPX not enabled on adapter 86 - Frame/network number bounds error 87 - Invalid frame type 88 - Invalid network number 89 - Duplicate network number 90 - Parameter out of bounds 91 - Access denied 92 - Out of memory 93 - Already exists 94 - Path, file or object not found 95 - Unable to notify service 96 - Unable to notify DNS service 97 - Interface not configurable 98 - Not all DHCP leases could be released/renewed 100 - DHCP not enabled on adapter Other - For integer values other than those listed above, refer to Win32 error code documentation.'
Values	['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']
DisableIPSec method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ EnableDHCP method
Return	uint32 {'out':True}
Description	'The EnableDHCP method enables the Dynamic Host Configuration Protocol (DHCP) for service with this network adapter. DHCP allows IP addresses to be dynamic allocated. The method returns an integer value that can be interpretted as follows: 0 - Successful completion, no reboot required 1 - Successful completion, reboot required 64 - Method not supported on this platform 65 - Unknown failure 66 - Invalid subnet mask 67 - An error occurred while processing an Instance that was returned 68 - Invalid input parameter 69 - More than 5 gateways specified 70 - Invalid IP address 71 - Invalid gateway IP address 72 - An error occurred while accessing the Registry for the requested information 73 - Invalid domain name 74 - Invalid host name 75 - No primary/secondary WINS server defined 76 - Invalid file 77 - Invalid system path 78 - File copy failed 79 - Invalid security parameter 80 - Unable to configure TCP/IP service 81 - Unable to configure DHCP service 82 - Unable to renew DHCP lease 83 - Unable to release DHCP lease 84 - IP not enabled on adapter 85 - IPX not enabled on adapter 86 - Frame/network number bounds error 87 - Invalid frame type 88 - Invalid network number 89 - Duplicate network number 90 - Parameter out of bounds 91 - Access denied 92 - Out of memory 93 - Already exists 94 - Path, file or object not found 95 - Unable to notify service 96 - Unable to notify DNS service 97 - Interface not configurable 98 - Not all DHCP leases could be released/renewed 100 - DHCP not enabled on adapter Other - For integer values other than those listed above, refer to Win32 error code documentation. '
Values	['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']
EnableDHCP method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 4 namespaces

…

▲ EnableDNS method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DNSHostName	string	0	✓	-	{'Description':'The DNSHostName parameter specifies the name of the DNS host to be enabled by this method.Example: corpdns','In':True}
DNSDomain	string	1	✓	-	{'Description':'The DNSDomain parameter specifies the DNS's domain. This parameter is represented by an organization name followed by a period, then an extension that indicates the type of organization. Example: microsoft.com','In':True}
DNSServerSearchOrder	string	2	✓	-	{'Description':'The DNSServerSearchOrder parameter specifies the list of server IP addresses to query for DNS servers.','In':True}
DNSDomainSuffixSearchOrder	string	3	✓	-	{'Description':'The DNSDomainSuffixSearchOrder parameter specifies the DNS domain suffixes that is appended to the host names during name resolution. When attempting to resolve a fully qualified domain name (FQDN) from a host only name, the system appends the local domain name. If this is not successful, the system uses the domain suffix list to create additional FQDNs in the order listed, and queries DNS servers for each one.','In':True}

Description

'The EnableDNS method enables the Domain Name System (DNS) for service on TCP/IP-bound network adapters. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']

EnableDNS method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ EnableIPFilterSec method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPFilterSecurityEnabled	boolean	0	✓	-	{'Description':'The IPFilterSecurityEnabled parameter specifies whether IP security is enabled globally across all IP-bound network adapters. If the input parameter IPFilterSecurityEnabled is TRUE, security is enabled. If the input parameter IPFilterSecurityEnabled is FALSE, all port and protocol traffic are allowed to flow unfiltered.','In':True}

Description

'The EnableIPFilterSec method is used to enable IP security globally across all IP-bound network adapters. With security enabled, the operational security characteristics for any single network adapter can be controlled using the network adapter specific EnableIPSec method. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

EnableIPFilterSec method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ EnableIPSec method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPSecPermitTCPPorts	string	0	✓	-	{'Description':'The IPSecPermitTCPPorts parameter specifies the list of ports that should be granted access permission for TCP. A numeric value of zero indicates access permission is granted for all ports. An empty string indicates that no ports should be granted access permission.','In':True}
IPSecPermitUDPPorts	string	1	✓	-	{'Description':'The IPSecPermitUDPPorts parameter specifies the list of ports that should be granted access permission for UDP. A numeric value of zero indicates access permission is granted for all ports. An empty string indicates that no ports should be granted access permission.','In':True}
IPSecPermitIPProtocols	string	2	✓	-	{'Description':'The IPSecPermitIPProtocols parameter specifies the list of protocols permitted to run over the IP. A numeric value of zero indicates access permission is granted for all protocols. An empty string indicates that no protocols should be granted access permission.','In':True}

Description

'The EnableIPSec method is used to enable IP security on this specific TCP/IP-enabled network adapter. Ports are secured only when the IPFilterSecurityEnabled property is TRUE.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

EnableIPSec method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ EnableStatic method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPAddress	string	0	✓	-	{'Description':'The IPAddress parameter lists all of the static IP addresses for the current network adapter. Example: 155.34.22.0','In':True}
SubnetMask	string	1	✓	-	{'Description':'The SubnetMask parameter contains the subnet masks that complement the values in the IPAddress parameter.Example: 255.255.0.0','In':True}

Description

'The EnableStatic method enables static TCP/IP addressing for the target network adapter. As a result, DHCP for this network adapter is disabled. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

EnableStatic method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ EnableWINS method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DNSEnabledForWINSResolution	boolean	0	✓	-	{'Description':'The DNSEnabledForWINSResolution parameter specifies whether the Domain Name System (DNS) is enabled for name resolution over WINS resolution.','In':True}
WINSEnableLMHostsLookup	boolean	1	✓	-	{'Description':'The WINSEnableLMHostsLookup parameter specifies whether local lookup files are used. Lookup files will contain mappings of IP addresses to host names.','In':True}
WINSHostLookupFile	string	2	✓	-	{'Description':'The WINSEnableLMHostsLookup parameter specifies the lookup files containing mappings of IP addresses to host names. If available, the files will be found in %SystemRoot%\system32\drivers\etc.','In':True}
WINSScopeID	string	3	✓	-	{'Description':'The WINSScopeID parameter specifies the Scope ID value that will be appended to the end of the computer's NetBIOS name. Systems using the same Scope ID can communicate with this computer.','In':True}

Description

'The EnableWINS method enables Windows Internet Naming Service (WINS) settings specific to TCP/IP, but independent of the network adapter. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

EnableWINS method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ ReleaseDHCPLease method
Return	uint32 {'out':True}
Description	'The ReleaseDHCPLease method releases the IP address bound to a specific DHCP enabled network adapter. WARNING: If DHCP is enabled on this local computer system, the option disables TCP/IP on this specific network adapter. Unless you have an alternate path to the target system; that is, another TCP/IP bound network adapter, all TCP/IP communications will be lost. The method returns an integer value that can be interpretted as follows: 0 - Successful completion, no reboot required 1 - Successful completion, reboot required 64 - Method not supported on this platform 65 - Unknown failure 66 - Invalid subnet mask 67 - An error occurred while processing an Instance that was returned 68 - Invalid input parameter 69 - More than 5 gateways specified 70 - Invalid IP address 71 - Invalid gateway IP address 72 - An error occurred while accessing the Registry for the requested information 73 - Invalid domain name 74 - Invalid host name 75 - No primary/secondary WINS server defined 76 - Invalid file 77 - Invalid system path 78 - File copy failed 79 - Invalid security parameter 80 - Unable to configure TCP/IP service 81 - Unable to configure DHCP service 82 - Unable to renew DHCP lease 83 - Unable to release DHCP lease 84 - IP not enabled on adapter 85 - IPX not enabled on adapter 86 - Frame/network number bounds error 87 - Invalid frame type 88 - Invalid network number 89 - Duplicate network number 90 - Parameter out of bounds 91 - Access denied 92 - Out of memory 93 - Already exists 94 - Path, file or object not found 95 - Unable to notify service 96 - Unable to notify DNS service 97 - Interface not configurable 98 - Not all DHCP leases could be released/renewed 100 - DHCP not enabled on adapter Other - For integer values other than those listed above, refer to Win32 error code documentation.'
Values	['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']
ReleaseDHCPLease method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ ReleaseDHCPLeaseAll method
Return	uint32 {'out':True}
Description	'The ReleaseDHCPLeaseAll method releases the IP addresses bound to all DHCP enabled network adapters. WARNING: If DHCP is enabled on this local computer system, the option will terminate all DHCP TCP/IP connections.The method returns an integer value that can be interpretted as follows: 0 - Successful completion, no reboot required 1 - Successful completion, reboot required 64 - Method not supported on this platform 65 - Unknown failure 66 - Invalid subnet mask 67 - An error occurred while processing an Instance that was returned 68 - Invalid input parameter 69 - More than 5 gateways specified 70 - Invalid IP address 71 - Invalid gateway IP address 72 - An error occurred while accessing the Registry for the requested information 73 - Invalid domain name 74 - Invalid host name 75 - No primary/secondary WINS server defined 76 - Invalid file 77 - Invalid system path 78 - File copy failed 79 - Invalid security parameter 80 - Unable to configure TCP/IP service 81 - Unable to configure DHCP service 82 - Unable to renew DHCP lease 83 - Unable to release DHCP lease 84 - IP not enabled on adapter 85 - IPX not enabled on adapter 86 - Frame/network number bounds error 87 - Invalid frame type 88 - Invalid network number 89 - Duplicate network number 90 - Parameter out of bounds 91 - Access denied 92 - Out of memory 93 - Already exists 94 - Path, file or object not found 95 - Unable to notify service 96 - Unable to notify DNS service 97 - Interface not configurable 98 - Not all DHCP leases could be released/renewed 100 - DHCP not enabled on adapter Other - For integer values other than those listed above, refer to Win32 error code documentation.'
Values	['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']
ReleaseDHCPLeaseAll method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ RenewDHCPLease method
Return	uint32 {'out':True}
Description	'The RenewDHCPLease method renews the IP address on specific DHCP-enabled network adapters. The lease for the IP address assigned via a DHCP server has an expiration date that the client must renew if it intends to continue use of the assigned IP address. The method returns an integer value that can be interpretted as follows: 0 - Successful completion, no reboot required 1 - Successful completion, reboot required 64 - Method not supported on this platform 65 - Unknown failure 66 - Invalid subnet mask 67 - An error occurred while processing an Instance that was returned 68 - Invalid input parameter 69 - More than 5 gateways specified 70 - Invalid IP address 71 - Invalid gateway IP address 72 - An error occurred while accessing the Registry for the requested information 73 - Invalid domain name 74 - Invalid host name 75 - No primary/secondary WINS server defined 76 - Invalid file 77 - Invalid system path 78 - File copy failed 79 - Invalid security parameter 80 - Unable to configure TCP/IP service 81 - Unable to configure DHCP service 82 - Unable to renew DHCP lease 83 - Unable to release DHCP lease 84 - IP not enabled on adapter 85 - IPX not enabled on adapter 86 - Frame/network number bounds error 87 - Invalid frame type 88 - Invalid network number 89 - Duplicate network number 90 - Parameter out of bounds 91 - Access denied 92 - Out of memory 93 - Already exists 94 - Path, file or object not found 95 - Unable to notify service 96 - Unable to notify DNS service 97 - Interface not configurable 98 - Not all DHCP leases could be released/renewed 100 - DHCP not enabled on adapter Other - For integer values other than those listed above, refer to Win32 error code documentation.'
Values	['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']
RenewDHCPLease method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ RenewDHCPLeaseAll method
Return	uint32 {'out':True}
Description	'The RenewDHCPLeaseAll method renews the IP addresses on all DHCP-enabled network adapters. The lease for the IP address assigned via a DHCP server has an expiration date that the client must renew if it intends to continue use of the assigned IP address. The method returns an integer value that can be interpretted as follows: 0 - Successful completion, no reboot required 1 - Successful completion, reboot required 64 - Method not supported on this platform 65 - Unknown failure 66 - Invalid subnet mask 67 - An error occurred while processing an Instance that was returned 68 - Invalid input parameter 69 - More than 5 gateways specified 70 - Invalid IP address 71 - Invalid gateway IP address 72 - An error occurred while accessing the Registry for the requested information 73 - Invalid domain name 74 - Invalid host name 75 - No primary/secondary WINS server defined 76 - Invalid file 77 - Invalid system path 78 - File copy failed 79 - Invalid security parameter 80 - Unable to configure TCP/IP service 81 - Unable to configure DHCP service 82 - Unable to renew DHCP lease 83 - Unable to release DHCP lease 84 - IP not enabled on adapter 85 - IPX not enabled on adapter 86 - Frame/network number bounds error 87 - Invalid frame type 88 - Invalid network number 89 - Duplicate network number 90 - Parameter out of bounds 91 - Access denied 92 - Out of memory 93 - Already exists 94 - Path, file or object not found 95 - Unable to notify service 96 - Unable to notify DNS service 97 - Interface not configurable 98 - Not all DHCP leases could be released/renewed 100 - DHCP not enabled on adapter Other - For integer values other than those listed above, refer to Win32 error code documentation.'
Values	['Successful completion, no reboot required', 'Successful completion, reboot required', 'Method not supported on this platform', 'Unknown failure', 'Invalid subnet mask', 'An error occurred while processing an Instance that was returned', 'Invalid input parameter', 'More than 5 gateways specified', 'Invalid IP address', 'Invalid gateway IP address', 'An error occurred while accessing the Registry for the requested information', 'Invalid domain name', 'Invalid host name', 'No primary/secondary WINS server defined', 'Invalid file', 'Invalid system path', 'File copy failed', 'Invalid security parameter', 'Unable to configure TCP/IP service', 'Unable to configure DHCP service', 'Unable to renew DHCP lease', 'Unable to release DHCP lease', 'IP not enabled on adapter', 'IPX not enabled on adapter', 'Frame/network number bounds error', 'Invalid frame type', 'Invalid network number', 'Duplicate network number', 'Parameter out of bounds', 'Access denied', 'Out of memory', 'Already exists', 'Path, file or object not found', 'Unable to notify service', 'Unable to notify DNS service', 'Interface not configurable', 'Not all DHCP leases could be released/renewed', 'DHCP not enabled on adapter', 'Other']
RenewDHCPLeaseAll method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetArpAlwaysSourceRoute method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
ArpAlwaysSourceRoute	boolean	0	✓	-	{'Description':'The ArpAlwaysSourceRoute parameter specifies a value that indicates if TCP/IP transmits ARP queries. Setting this parameter to TRUE will force TCP/IP to transmit ARP queries with source routing enabled on Token Ring networks. By default, the stack transmits ARP queries without source routing first, then retries with source routing enabled if no reply is received.','In':True}

Description

'The SetArpAlwaysSourceRoute method is used to set the transmission of ARP queries by the TCP/IP. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetArpAlwaysSourceRoute method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetArpUseEtherSNAP method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
ArpUseEtherSNAP	boolean	0	✓	-	{'Description':'The ArpUseEtherSNAP parameter enables (TRUE)TCP/IP to transmit Ethernet packets using 802.3 SNAP encoding.','In':True}

Description

'The SetArpUseEtherSNAP method is used to enable ethernet packets to use 802.3 SNAP encoding. By default, the stack transmits packets in Digital, Intel, Xerox(DIX) Ethernet format. It will always receive both formats. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetArpUseEtherSNAP method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDatabasePath method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DatabasePath	string	0	✓	-	{'Description':'The DatabasePath parameter specifies a valid Windows 2000 and Windows NT 3.51 or higher file path to standard Internet database files (HOSTS, LMHOSTS, NETWORKS, PROTOCOLS) used by the Windows Sockets interface.','In':True}

Description

'The SetDatabasePath method sets the path to the standard Internet database files (HOSTS, LMHOSTS, NETWORKS, PROTOCOLS). It is used by the Windows Sockets interface. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation. '

Values

SetDatabasePath method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDeadGWDetect method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DeadGWDetectEnabled	boolean	0	✓	-	{'Description':'The DeadGWDetectEnabled parameter specifies a value that can enable the TCP to perform dead gateway detection. If TRUE, the method will enable dead gateway detection.','In':True}

Description

'The SetDeadGWDetect method is used to enable Dead Gateway detection. Setting this parameter to TRUE causes TCP to perform Dead Gateway Detection. With this feature enabled, TCP asks IP to change to a backup gateway if it retransmits a segment several times without receiving a response. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDeadGWDetect method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDefaultTOS method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DefaultTOS	uint8	0	✓	-	{'Description':'The DefaultTOS parameter specifies the Type of Service (TOS) value put in the header of outgoing IP packets. See RFC 791 for a definition of the values.','In':True}

Description

'The SetDefaultTOS method is used to set the default Type of Service (TOS) value in the header of outgoing IP packets. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDefaultTOS method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDefaultTTL method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DefaultTTL	uint8	0	✓	-	{'Description':'The DefaultTTL parameter specifies the Time to Live value set in the header of outgoing IP packets.','In':True}

Description

'The SetDefaultTTL method is used to set the default Time to Live (TTL) value in the header of outgoing IP packets. The TTL specifies the number of routers an IP packet may pass through to reach its destination before being discarded. Each router decrements the TTL count of a packet by one and discards the packets with a TTL of 0. Default: 32, Valid Range: 1 - 255The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDefaultTTL method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDNSDomain method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DNSDomain	string	0	✓	-	{'Description':'The DNSDomain parameter indicates the domain the DNSis associated with and is represented by an organization name followed by a period and an extension that indicates the type of organization.Example: microsoft.com.','In':True}

Description

'The SetDNSDomain method allows for the setting of the DNS domain. This is an instance dependent method call that applies on a per adapter basis. On Windows 2000 the setting applies to the targeted adapter. On NT4 this setting is global.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDNSDomain method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDNSServerSearchOrder method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DNSServerSearchOrder	string	0	✓	-	{'Description':'The DNSServerSearchOrder parameter indicates the list of server IP addresses to query for DNS Servers.Example:130.215.24.1 157.54.164.1','In':True}

Description

'The SetDNSServerSearchOrder method allows for the setting of the server search order as a array of elements. This is an instance dependent method call that applies on a per adapter basis. On Windows 2000 the setting applies to the targeted adapter. On NT4 this setting is global.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDNSServerSearchOrder method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDNSSuffixSearchOrder method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DNSDomainSuffixSearchOrder	string	0	✓	-	{'Description':'The DNSServerSearchOrder parameter indicates the list of server IP addresses suffixes to query for DNS Servers.Example:130.215.24.1 157.54.164.1','In':True}

Description

'The SetDNSSuffixSearchOrder method allows for the setting of the suffix search order as a array of elements. This is an instance independent method call that applies across all adapters. Windows NT only. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDNSSuffixSearchOrder method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetDynamicDNSRegistration method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
FullDNSRegistrationEnabled	boolean	0	✓	-	{'Description':'The FullDNSRegistrationEnabled parameter specifies whether the IP addresses for this connection are registered in DNS under the computer's full DNS name. The full DNS name of the computer is displayed on the Network Identification tab of the System Control Panel. Windows 2000 only.','In':True}
DomainDNSRegistrationEnabled	boolean	1	✓	-	{'Description':'The DomainDNSRegistrationEnabled parameter specifies whether the IP addresses for this connection are registered in DNS under the domain name of this connection, in addition to registering under the computer's full DNS name. The domain name of this connection is either set via the method SetDNSDomain() or assigned by DHCP. The registered name is the host name of the computer with the domain name appended. This parameter has meaning only when FullDNSRegistrationEnabled is enabled. Default: FALSE. Windows 2000 only.','In':True}

Description

'The SetDynamicDNSRegistration method is used to indicate dynamic DNS registration of IP addresses for this IP bound adapter. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetDynamicDNSRegistration method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetForwardBufferMemory method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
ForwardBufferMemory	uint32	0	✓	-	{'Description':'The ForwardBufferMemory parameter specifies the size of the router packet queue used to store packet data.','In':True,'Units':'bytes'}

Description

'The SetForwardBufferMemory method is used to specify how much memory IP allocates to store packet data in the router packet queue. When this buffer space is filled, the router begins discarding packets at random from its queue. Packet queue data buffers are 256 bytes in length, so the value of this parameter should be a multiple of 256. Multiple buffers are chained together for larger packets. The IP header for a packet is stored separately. This parameter is ignored and no buffers are allocated if the IP router is not enabled. The buffer size can range from the network MTU to the a value smaller than 0xFFFFFFFF. Default: 74240 (fifty 1480-byte packets, rounded to a multiple of 256).The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetForwardBufferMemory method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetGateways method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
DefaultIPGateway	string	0	✓	-	{'Description':'The DefaultIPGateway is an input parameter to the SetGateways method. It contains a list of IP addresses to gateways where network packets should be routed.','In':True}
GatewayCostMetric	uint16	1	✓	-	{'Description':'The GatewayCostMetric parameter assigns an value ranging from 1 to 9999, used to calculate fastest and most reliable routes. The values of this parameter correspondence with the values in the DefaultIPGateway[] parameter. The default value for a gateway is 1. This parameter is for Windows 2000 only.','In':True}

Description

'The SetGateways method is used to specify a list of gateways for routing packets destined for a different subnet than the one this adapter is connected to. A more specific route should not exist for this subnet. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetGateways method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetIGMPLevel method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IGMPLevel	uint8	0	✓	-	{'Description':'The IGMPLevel parameter sets the level that the system supports IP multicast and participates in the Internet Group Management Protocol. At level 0, the system provides no multicast support. At level 1, the system may only send IP multicast packets. At level 2, the system may send IP multicast packets and fully participate in IGMP to receive multicast packets.','In':True,'Values':['No Multicast', 'IP Multicast', 'IP & IGMP multicast']}

Description

'The SetIGMPLevel method is used to set the extent to which the system supports IP multicasting and participates in the Internet Group Management Protocol. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetIGMPLevel method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetIPConnectionMetric method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPConnectionMetric	uint32	0	✓	-	{'Description':'The IPConnectionMetric parameter assigns an value ranging from 1 to 9999, and indicates the cost of using the configured routes for this IP bound adapter and is the weighted value for those routes in the IP routing table. If there are multiple routes to a destination in the IP routing table, the route with the lowest metric is used. The default value is 1. Windows 2000 only.','In':True}

Description

'The SetIPConnectionMetric method is used to set the routing metric associated with this IP bound adapter. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetIPConnectionMetric method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetIPUseZeroBroadcast method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPUseZeroBroadcast	boolean	0	✓	-	{'Description':'The IPUseZeroBroadcast parameter specifies the value indicating whether IP zero broadcast is used. Setting the parameter to TRUE indicates that IP zero broadcast is used.','In':True}

Description

'The SetIPUseZeroBroadcast method is used to set IP zero broadcast usage. If this parameter is set to TRUE, then IP will use zeros-broadcasts (0.0.0.0) instead of ones-broadcasts (255.255.255.255). Most systems use ones-broadcasts, but systems derived from BSD implementations use zeros-broadcasts. Systems that use different broadcasts will not interoperate on the same network. Default: FALSE. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetIPUseZeroBroadcast method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetIPXFrameTypeNetworkPairs method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPXNetworkNumber	string	0	✓	-	{'Description':'The IPXNetworkNumber parameter specifies an array of characters that uniquely identify an adapter on the computer system. The NetWare Link (NWLink) IPX/SPX-compatible transport in Windows 2000 and Windows NT 3.51 or higher, uses two different types of network numbers. This number is sometimes referred to as the External Network Number. It must be unique for each network segment. The values in this string list must have a corresponding value in the IPXFrameType parameter identifying the packet frame type used for this network.','In':True}
IPXFrameType	uint32	1	✓	-	{'Description':'The IPXFrameType parameter specifies an integer array of frame type identifiers. The values in this array correspond to the elements in the IPXNetworkNumber parameter.','In':True,'Values':['Ethernet II', 'Ethernet 802.3', 'Ethernet 802.2', 'Ethernet SNAP', 'AUTO']}

Description

'The SetIPXFrameTypeNetworkPairs method is used to set Internetworking Packet Exchange (IPX) network number/frame pairs for this network adapter. Windows 2000 and Windows NT 3.51 and higher use an IPX network number for routing purposes. It is assigned to each configured frame type/network adapter combination on your computer system. This number is sometimes referred to as the "external network number." It must be unique for each network segment. If the frame type is set to AUTO, the network number should to zero. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetIPXFrameTypeNetworkPairs method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetIPXVirtualNetworkNumber method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
IPXVirtualNetNumber	string	0	✓	-	{'Description':'The IPXVirtualNetNumber parameter specifies the virtual network number for this system.','In':True}

Description

'The SetIPXVirtualNetworkNumber method is used to set the Internetworking Packet Exchange (IPX) virtual network number on the target computer system. Windows 2000 and Windows NT 3.51 or greater uses an internal network number for internal routing. The internal network number is also known as a virtual network number. It uniquely identifies the computer system on the network. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetIPXVirtualNetworkNumber method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetKeepAliveInterval method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
KeepAliveInterval	uint32	0	✓	-	{'Description':'The KeepAliveInterval parameter specifies the value for the interval separating Keep Alive Retransmissions until a response is received.','In':True,'Units':'milliseconds'}

Description

'The SetKeepAliveInterval method is used to set the interval separating Keep Alive Retransmissions until a response is received. Once a response is received, the delay until the next Keep Alive Transmission is again controlled by the value of KeepAliveTime. The connection will be terminated after the number of retransmissions specified by TcpMaxDataRetransmissions have gone unanswered. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetKeepAliveInterval method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetKeepAliveTime method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
KeepAliveTime	uint32	0	✓	-	{'Description':'The KeepAliveTime parameter specifies the interval the TCP waits to check that an idle connection is still available.','In':True,'Units':'milliseconds'}

Description

'The SetKeepAliveTime method is used to set how often TCP attempts to verify that an idle connection is still available by sending a Keep Alive packet. If the remote system is still reachable and functioning, it will acknowledge the Keep Alive transmission. Keep Alive packets are not sent by default. This feature may be enabled in a connection by an application. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetKeepAliveTime method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetMTU method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
MTU	uint32	0	✓	-	{'Description':'The MTU input parameter specifies the default Maximum Transmission Unit (MTU) for a network interface The range of this value spans the minimum packet size (68) to the MTU supported by the underlying network.','In':True}

Description

'The SetMTU method is used to set the default Maximum Transmission Unit (MTU) for a network interface.
The SetMTU method has been deprecated. There is no replacementand the values returned do not corresepond to the method's intended purpose.
The MTU is the maximum packet size (in bytes) that the transport will transmit over the underlying network. The size includes the transport header. Note that an IP datagram may span multiple packets. Values larger than the default for the underlying network will result in the transport using the network default MTU. Values smaller than 68 will result in the transport using an MTU of 68. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetMTU method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetNumForwardPackets method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
NumForwardPackets	uint32	0	✓	-	{'Description':'The NumForwardPackets parameter specifies the number of IP packet headers allocated for the router packet queue. This should be at least as large as the value of the ForwardBufferMemory property divided by the maximum IP data size of the networks connected to the router. It should be no larger than the ForwardBufferMemory value divided by 256, since at least 256 bytes of forward buffer memory are required by each packet. The optimal number of forward packets for a given ForwardBufferMemory size depends on the type of traffic carried on the network, and will be somewhere between these two values. If the router is disabled, this parameter is ignored and no headers are allocated. Valid Range: 1 - 0xFFFFFFFE.','In':True}

Description

'The SetNumForwardPackets method is used to set the number of IP packet headers allocated for the router packet queue. When all headers are in use, the router will begin to discard packets from the queue at random.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetNumForwardPackets method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetPMTUBHDetect method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
PMTUBHDetectEnabled	boolean	0	✓	-	{'Description':'The PMTUBHDetectEnabled parameter specifies whether the detection of "Black Hole" routers is enabled. If TRUE, the method makes TCP attempt to discover "Black Hole" and route packets in different network paths.','In':True}

Description

'The SetPMTUBHDetect method is used to enable detection of Black Hole routers. Setting this parameter to TRUE causes TCP to try to detect Black Hole routers while doing Path MTU Discovery. A Black Hole router does not return the Internet Control Message Protocol (ICMP) Destination Unreachable messages when it needs to fragment an IP datagram with the Don't Fragment bit set. TCP depends on receiving these messages to perform Path MTU Discovery. With this feature enabled, TCP will try to send segments without the Don't Fragment bit set if several retransmissions of a segment go unacknowledged. If the segment is acknowledged as a result, the maximum segment size (MSS) will be decreased and the Don't Fragment bit will be set in future packets on the connection. Enabling black hole detection increases the maximum number of retransmissions performed for a given segment. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetPMTUBHDetect method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetPMTUDiscovery method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
PMTUDiscoveryEnabled	boolean	0	✓	-	{'Description':'The PMTUDiscoveryEnabled parameter can enable TCP to attempt to discover the Maximum Transmission Unit (MTU) or largest packet size over the path to a remote host. If TRUE, the method makes TCP to attempt to discover the MTU.','In':True}

Description

'The SetPMTUDiscovery method is used to enable Maximum Transmission Unit (MTU) discovery. Setting this parameter to TRUE causes TCP to attempt to discover the MTU (or largest packet size) over the path to a remote host. By discovering the Path MTU and limiting TCP segments to this size, TCP can eliminate fragmentation at routers along the path that connect networks with different MTUs. Fragmentation adversely affects TCP throughput and network congestion. Setting this parameter to FALSE causes an MTU of 576 bytes to be used for all connections that are not to machines on the local subnet. Default: TRUE. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetPMTUDiscovery method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetTcpipNetbios method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
TcpipNetbiosOptions	uint32	0	✓	-	{'Description':'The TcpipNetbiosOptions parameter specifies a bitmap of the possible settings related to NetBIOS over TCP/IP.','In':True,'Values':['EnableNetbiosViaDhcp', 'EnableNetbios', 'DisableNetbios']}

Description

'The SetTcpipNetbios method is used to set the default operation of NetBIOS over TCP/IP for this network adapter. Windows 2000 only. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetTcpipNetbios method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetTcpMaxConnectRetransmissions method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
TcpMaxConnectRetransmissions	uint32	0	✓	-	{'Description':'The TcpMaxConnectRetransmissions parameter specifies the number of attempts TCP will retransmit a connect request before aborting. Valid Range: 0 - 0xFFFFFFFF.','In':True}

Description

'The SetTcpMaxConnectRetransmissions method is used to set the number of attempts TCP will retransmit a Connect Request before aborting. The initial retransmission timeout is 3 seconds and doubles for each attempt.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetTcpMaxConnectRetransmissions method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetTcpMaxDataRetransmissions method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
TcpMaxDataRetransmissions	uint32	0	✓	-	{'Description':'The TcpMaxDataRetransmissions parameter specifies the number of times TCP will retransmit an individual data segment before aborting the connection. Valid Range: 0 - 0xFFFFFFFF.','In':True}

Description

'The SetTcpMaxDataRetransmissions method is used to set the number of times TCP will retransmit an individual data segment before aborting the connection. The retransmission timeout doubles with each successive retransmission on a connection.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetTcpMaxDataRetransmissions method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetTcpNumConnections method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
TcpNumConnections	uint32	0	✓	-	{'Description':'The TcpNumConnections parameter specifies the maximum number of connections that TCP may have open simultaneously. Valid Range: 0 - 0xFFFFFE.','In':True}

Description

'The SetTcpNumConnections method is used to set the maximum number of connections that TCP may have open simultaneously.The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetTcpNumConnections method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetTcpUseRFC1122UrgentPointer method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
TcpUseRFC1122UrgentPointer	boolean	0	✓	-	{'Description':'The TcpUseRFC1122UrgentPointer parameter specifies whether TCP uses the RFC 1122 specification or the mode used by BSD-derived systems, for urgent data. If TRUE, urgent data is sent in RFC 1122 mode.','In':True}

Description

'The SetTcpUseRFC1122UrgentPointer method is used to specify whether TCP uses the RFC 1122 specification for urgent data, or the mode used by Berkeley Software Design (BSD) derived systems. The two mechanisms interpret the urgent pointer in the TCP header and the length of the urgent data differently. They are not interoperable. Windows 2000 and Windows NT version 3.51 or higher defaults to BSD mode. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetTcpUseRFC1122UrgentPointer method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetTcpWindowSize method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
TcpWindowSize	uint16	0	✓	-	{'Description':'The TcpWindowSize parameter specifies the maximum TCP receive window size offered by the system. Valid Range: 0 - 65535.','In':True,'Units':'bytes'}

Description

'The SetTcpWindowSize method is used to set the maximum TCP Receive Window size offered by the system. The Receive Window specifies the number of bytes a sender can transmit without receiving an acknowledgment. In general, larger receive windows improve performance over high delay and high bandwidth networks. For efficiency, the receive window should be an even multiple of the TCP Maximum Segment Size (MSS). The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetTcpWindowSize method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ SetWINSServer method

Return

uint32 {'out':True}

Parameters

Name	CIMType	ID	IN	OUT	Qualifiers
WINSPrimaryServer	string	0	✓	-	{'Description':'The WINSPrimaryServer parameter specifies the IP address of the primary WINS server.','In':True}
WINSSecondaryServer	string	1	✓	-	{'Description':'The WINSSecondaryServer parameter specifies the IP address of the secondary WINS server.','In':True}

Description

'The SetWINSServer method sets the primary and secondary Windows Internet Naming Service (WINS) servers on this TCP/IP-bound network adapter. This method is applied independently of the network adapter. The method returns an integer value that can be interpretted as follows:
0 - Successful completion, no reboot required
1 - Successful completion, reboot required
64 - Method not supported on this platform
65 - Unknown failure
66 - Invalid subnet mask
67 - An error occurred while processing an Instance that was returned
68 - Invalid input parameter
69 - More than 5 gateways specified
70 - Invalid IP address
71 - Invalid gateway IP address
72 - An error occurred while accessing the Registry for the requested information
73 - Invalid domain name
74 - Invalid host name
75 - No primary/secondary WINS server defined
76 - Invalid file
77 - Invalid system path
78 - File copy failed
79 - Invalid security parameter
80 - Unable to configure TCP/IP service
81 - Unable to configure DHCP service
82 - Unable to renew DHCP lease
83 - Unable to release DHCP lease
84 - IP not enabled on adapter
85 - IPX not enabled on adapter
86 - Frame/network number bounds error
87 - Invalid frame type
88 - Invalid network number
89 - Duplicate network number
90 - Parameter out of bounds
91 - Access denied
92 - Out of memory
93 - Already exists
94 - Path, file or object not found
95 - Unable to notify service
96 - Unable to notify DNS service
97 - Interface not configurable
98 - Not all DHCP leases could be released/renewed
100 - DHCP not enabled on adapter
Other - For integer values other than those listed above, refer to Win32 error code documentation.'

Values

SetWINSServer method is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

Detailed description of Win32_NetworkAdapterConfiguration properties

Local properties (58) of Win32_NetworkAdapterConfiguration class

…

▲ ArpAlwaysSourceRoute property
CIMTYPE	'boolean'
Description	'The ArpAlwaysSourceRoute property indicates whether the Address Resolution Protocol (ARP) must always use source routing. If this property is TRUE, TCP/IP will transmit ARP queries with source routing enabled on Token Ring networks. By default, ARP first queries without source routing, and retries with source routing enabled if no reply was received. Source routing allows the routing of network packets across different types of networks. Default: FALSE.'
ArpAlwaysSourceRoute property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ ArpUseEtherSNAP property
CIMTYPE	'boolean'
Description	'The ArpUseEtherSNAP property indicates whether Ethernet packets follow the IEEE 802.3 Sub-Network Access Protocol (SNAP) encoding. Setting this parameter to 1 will force TCP/IP to transmit Ethernet packets using 802.3 SNAP encoding. By default, the stack transmits packets in DIX Ethernet format. Windows NT/Windows 2000 systems are able to receive both formats. Default: FALSE.'
ArpUseEtherSNAP property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DatabasePath property
CIMTYPE	'string'
Description	'The DatabasePath property indicates a valid Windows file path to standard Internet database files (HOSTS, LMHOSTS, NETWORKS, PROTOCOLS). The file path is used by the Windows Sockets interface. This property is only available on Windows NT/Windows 2000 systems.'
DatabasePath property is in 2 classes of ROOT\CIMV2\ms_409 and in 6 namespaces

…

▲ DeadGWDetectEnabled property
CIMTYPE	'boolean'
Description	'The DeadGWDetectEnabled property indicates whether dead gateway detection occurs. Setting this parameter to TRUE causes TCP to perform Dead Gateway Detection. With this feature enabled, TCP will ask IP to change to a backup gateway if it retransmits a segment several times without receiving a response. Default: TRUE.'
DeadGWDetectEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DefaultIPGateway property
CIMTYPE	'string'
Description	'The DefaultIPGateway property contains a list of IP addresses of default gateways used by the computer system. Example: 194.161.12.1 194.162.46.1'
DefaultIPGateway property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DefaultTOS property
CIMTYPE	'uint8'
Description	'The DefaultTOS property indicates the default Type Of Service (TOS) value set in the header of outgoing IP packets. RFC 791 defines the values. Default: 0, Valid Range: 0 - 255.'
DefaultTOS property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DefaultTTL property
CIMTYPE	'uint8'
Description	'The DefaultTTL property indicates the default Time To Live (TTL) value set in the header of outgoing IP packets. The TTL specifies the number of routers an IP packet may pass through to reach its destination before being discarded. Each router decrements the TTL count of a packet by one as it passes through and discards the packets if the TTL is 0. Default: 32, Valid Range: 1 - 255.'
DefaultTTL property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DHCPEnabled property
CIMTYPE	'boolean'
Description	'The DHCPEnabled property indicates whether the dynamic host configuration protocol (DHCP) server automatically assigns an IP address to the computer system when establishing a network connection. Values: TRUE or FALSE. If TRUE, DHCP is enabled.'
DHCPEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 9 namespaces

…

▲ DHCPLeaseExpires property
CIMTYPE	'datetime'
Description	'The DHCPLeaseExpires property indicates the expiration date and time for a leased IP address that was assigned to the computer by the dynamic host configuration protocol (DHCP) server. Example: 20521201000230.000000000'
DHCPLeaseExpires property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DHCPLeaseObtained property
CIMTYPE	'datetime'
Description	'The DHCPLeaseObtained property indicates the date and time the lease was obtained for the IP address assigned to the computer by the dynamic host configuration protocol (DHCP) server. Example: 19521201000230.000000000'
DHCPLeaseObtained property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DHCPServer property
CIMTYPE	'string'
Description	'The DHCPServer property indicates the IP address of the dynamic host configuration protocol (DHCP) server. Example: 154.55.34'
DHCPServer property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 4 namespaces

…

▲ DNSDomain property
CIMTYPE	'string'
Description	'The DNSDomain property indicates an organization name followed by a period and an extension that indicates the type of organization, such as microsoft.com. The name can be any combination of the letters A through Z, the numerals 0 through 9, and the hyphen (-), plus the period (.) character used as a separator. Example: microsoft.com'
DNSDomain property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DNSDomainSuffixSearchOrder property
CIMTYPE	'string'
Description	'The DNSDomainSuffixSearchOrder property specifies the DNS domain suffixes to be appended to the end of host names during name resolution. When attempting to resolve a fully qualified domain name (FQDN) from a host only name, the system will first append the local domain name. If this is not successful, the system will use the domain suffix list to create additional FQDNs in the order listed and query DNS servers for each. Example: samples.microsoft.com example.microsoft.com'
DNSDomainSuffixSearchOrder property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DNSEnabledForWINSResolution property
CIMTYPE	'boolean'
Description	'The DNSEnabledForWINSResolution property indicates whether the Domain Name System (DNS) is enabled for name resolution over Windows Internet Naming Service (WINS) resolution. If the name cannot be resolved using DNS, the name request is forwarded to WINS for resolution.'
DNSEnabledForWINSResolution property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DNSHostName property
CIMTYPE	'string'
Description	'The DNSHostName property indicates the host name used to identify the local computer for authentication by some utilities. Other TCP/IP-based utilities can use this value to acquire the name of the local computer. Host names are stored on DNS servers in a table that maps names to IP addresses for use by DNS. The name can be any combination of the letters A through Z, the numerals 0 through 9, and the hyphen (-), plus the period (.) character used as a separator. By default, this value is the Microsoft networking computer name, but the network administrator can assign another host name without affecting the computer name. Example: corpdns'
DNSHostName property is in 2 classes of ROOT\CIMV2\ms_409 and in 4 namespaces

…

▲ DNSServerSearchOrder property
CIMTYPE	'string'
Description	'The DNSServerSearchOrder property indicates an ordered list of server IP addresses to be used in querying for DNS Servers.'
DNSServerSearchOrder property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ DomainDNSRegistrationEnabled property
CIMTYPE	'boolean'
Description	'The DomainDNSRegistrationEnabled property specifies whether the IP addresses for this connection are registered in DNS under the domain name of this connection, in addition to registering under the computer's full DNS name. The domain name of this connection is either set via the method SetDNSDomain() or assigned by DHCP. The registered name is the host name of the computer with the domain name appended. Windows 2000 only.'
DomainDNSRegistrationEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ ForwardBufferMemory property
CIMTYPE	'uint32'
Description	'The ForwardBufferMemory property indicates how much memory IP allocates to store packet data in the router packet queue. When this buffer space is filled, the router begins discarding packets at random from its queue. Packet queue data buffers are 256 bytes in length, so the value of this parameter should be a multiple of 256. Multiple buffers are chained together for larger packets. The IP header for a packet is stored separately. This parameter is ignored and no buffers are allocated if the IP router is not enabled. The buffer size can range from the network MTU to the a value smaller than 0xFFFFFFFF. Default: 74240 (fifty 1480-byte packets, rounded to a multiple of 256).'
Units	'bytes'
ForwardBufferMemory property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ FullDNSRegistrationEnabled property
CIMTYPE	'boolean'
Description	'The FullDNSRegistrationEnabled property specifies whether the IP addresses for this connection are registered in DNS under the computer's full DNS name. The full DNS name of the computer is displayed on the Network Identification tab of the System Control Panel. Windows 2000 only.'
FullDNSRegistrationEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ GatewayCostMetric property
CIMTYPE	'uint16'
Description	'The GatewayCostMetric reflects an integer cost metric (ranging from 1 to 9999) to be used in calculating the fastest, most reliable, and/or least expensive routes. This argument has a one to one correspondence with the DefaultIPGateway. Windows 2000 only.'
GatewayCostMetric property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IGMPLevel property
CIMTYPE	'uint8'
Description	'The IGMPLevel property indicates the extent to which the system supports IP multicast and participates in the Internet Group Management Protocol. At level 0, the system provides no multicast support. At level 1, the system may only send IP multicast packets. At level 2, the system may send IP multicast packets and fully participate in IGMP to receive multicast packets. Default: 2'
Values	['No Multicast', 'IP Multicast', 'IP & IGMP multicast']
IGMPLevel property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ Index property
CIMTYPE	'uint32'
Description	'The Index property specifies the index number of the Win32 network adapter configuration. The index number is used when there is more than one configuration available.'
key	True
Index property is in 6 classes of ROOT\CIMV2\ms_409 and in 10 namespaces

…

▲ InterfaceIndex property
CIMTYPE	'uint32'
Description	'The InterfaceIndex property contains the index value that uniquely identifies the local interface.'
InterfaceIndex property is in 3 classes of ROOT\CIMV2\ms_409 and in 9 namespaces

…

▲ IPAddress property
CIMTYPE	'string'
Description	'The IPAddress property contains a list of all of the IP addresses associated with the current network adapter. Example: 155.34.22.0'
IPAddress property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 25 namespaces

…

▲ IPConnectionMetric property
CIMTYPE	'uint32'
Description	'The IPConnectionMetric indicates the cost of using the configured routes for this IP bound adapter and is the weighted value for those routes in the IP routing table. If there are multiple routes to a destination in the IP routing table, the route with the lowest metric is used. The default value is 1.Windows 2000 only.'
IPConnectionMetric property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPEnabled property
CIMTYPE	'boolean'
Description	'The IPEnabled property indicates whether TCP/IP is bound and enabled on this network adapt.'
IPEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPFilterSecurityEnabled property
CIMTYPE	'boolean'
Description	'The IPFilterSecurityEnabled property indicates whether IP port security is enabled globally across all IP-bound network adapters. This property is used in conjunction with IPSecPermitTCPPorts, IPSecPermitUDPPorts, and IPSecPermitIPProtocols. A value of TRUE indicates that IP port security is enabled and that the security values associated with individual network adapters are in effect. A value of FALSE indicates IP filter security is disabled across all network adapters and allows all port and protocol traffic to flow unfiltered.'
IPFilterSecurityEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPPortSecurityEnabled property
CIMTYPE	'boolean'
Description	'The IPPortSecurityEnabled property indicates whether IP port security is enabled globally across all IP-bound network adapters. This property has been deprecated in favor of IPFilterSecurityEnabled.'
IPPortSecurityEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPSecPermitIPProtocols property
CIMTYPE	'string'
Description	'The IPSecPermitIPProtocols property lists the protocols permitted to run over the IP. The list of protocols is defined using the EnableIPSec method. The list will either be empty or contain numeric values. A numeric value of zero indicates access permission is granted for all protocols. An empty string indicates that no protocols are permitted to run when IPFilterSecurityEnabled is TRUE.'
IPSecPermitIPProtocols property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPSecPermitTCPPorts property
CIMTYPE	'string'
Description	'The IPSecPermitTCPPorts property lists the ports that will be granted access permission for TCP. The list of protocols is defined using the EnableIPSec method. The list will either be empty or contain numeric values. A numeric value of zero indicates access permission is granted for all ports. An empty string indicates that no ports are granted access permission when IPFilterSecurityEnabled is TRUE.'
IPSecPermitTCPPorts property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPSecPermitUDPPorts property
CIMTYPE	'string'
Description	'The IPSecPermitUDPPorts property lists the ports that will be granted User Datagram Protocol (UDP) access permission. The list of protocols is defined using the EnableIPSec method. The list will either be empty or contain numeric values. A numeric value of zero indicates access permission is granted for all ports. An empty string indicates that no ports are granted access permission when IPFilterSecurityEnabled is TRUE.'
IPSecPermitUDPPorts property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPSubnet property
CIMTYPE	'string'
Description	'The IPSubnet property contains a list of all the subnet masks associated with the current network adapter. Example: 255.255.0'
IPSubnet property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPUseZeroBroadcast property
CIMTYPE	'boolean'
Description	'The IPUseZeroBroadcast property indicates whether IP zeros-broadcasts are used. If this parameter is set TRUE, then IP uses zeros-broadcasts (0.0.0.0), and the system uses ones-broadcasts (255.255.255.255). Computer systems generally use ones-broadcasts, but those derived from BSD implementations use zeros-broadcasts. Systems that do not use that same broadcasts will not interoperate on the same network. Default: FALSE.'
IPUseZeroBroadcast property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPXAddress property
CIMTYPE	'string'
Description	'The IPXAddress property indicates the Internetworking Packet Exchange (IPX) address of the network adapter. The IPX address identifies a computer system on a network using the IPX protocol.'
IPXAddress property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPXEnabled property
CIMTYPE	'boolean'
Description	'The IPXEnabled property determines whether the or Internetwork Packet Exchange (IPX) protocol is bound and enabled for this adapter.'
IPXEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPXFrameType property
CIMTYPE	'uint32'
Description	'The IPXFrameType property represents an integer array of frame type identifiers. The values in this array correspond to the elements in the IPXNetworkNumber.'
Values	['Ethernet II', 'Ethernet 802.3', 'Ethernet 802.2', 'Ethernet SNAP', 'AUTO']
IPXFrameType property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPXMediaType property
CIMTYPE	'uint32'
Description	'The IPXMediaType property represents an Internetworking Packet Exchange (IPX) media type identifier.'
Values	['Ethernet', 'Token ring', 'FDDI', 'ARCNET']
IPXMediaType property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPXNetworkNumber property
CIMTYPE	'string'
Description	'The IPXNetworkNumber property represents an array of characters that uniquely identifies a frame/network adapter combination on the computer system. The NetWare Link (NWLink) IPX/SPX-compatible transport in Windows 2000 and Windows NT 4.0 and greater uses two distinctly different types of network numbers. This number is sometimes referred to as the external network number. It must be unique for each network segment. The order in this string list will correspond item-for-item with the elements in the IPXFrameType property.'
IPXNetworkNumber property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ IPXVirtualNetNumber property
CIMTYPE	'string'
Description	'The IPXVirtualNetNumber property uniquely identifies the computer system on the network. It is represented in the form of an eight-character hexadecimal digit. Windows NT/2000 uses the virtual network number (also known as an internal network number) for internal routing.'
IPXVirtualNetNumber property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ KeepAliveInterval property
CIMTYPE	'uint32'
Description	'The KeepAliveInterval property indicates the interval separating Keep Alive Retransmissions until a response is received. Once a response is received, the delay until the next Keep Alive Transmission is again controlled by the value of KeepAliveTime. The connection will be aborted after the number of retransmissions specified by TcpMaxDataRetransmissions have gone unanswered. Default: 1000, Valid Range: 1 - 0xFFFFFFFF.'
Units	'milliseconds'
KeepAliveInterval property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ KeepAliveTime property
CIMTYPE	'uint32'
Description	'The KeepAliveTime property indicates how often the TCP attempts to verify that an idle connection is still intact by sending a Keep Alive Packet. A remote system that is reachable will acknowledge the keep alive transmission. Keep Alive packets are not sent by default. This feature may be enabled in a connection by an application. Default: 7,200,000 (two hours)'
Units	'milliseconds'
KeepAliveTime property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 3 namespaces

…

▲ MACAddress property
CIMTYPE	'string'
Description	'The MACAddress property indicates the Media Access Control (MAC) address of the network adapter. A MAC address is assigned by the manufacturer to uniquely identify the network adapter. Example: 00:80:C7:8F:6C:96'
MACAddress property is in 2 classes of ROOT\CIMV2\ms_409 and in 10 namespaces

…

▲ MTU property
CIMTYPE	'uint32'
Description	'The MTU property overrides the default Maximum Transmission Unit (MTU) for a network interface. The MTU is the maximum packet size (including the transport header) that the transport will transmit over the underlying network. The IP datagram can span multiple packets. The range of this value spans the minimum packet size (68) to the MTU supported by the underlying network.'
Units	'bytes'
MTU property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ NumForwardPackets property
CIMTYPE	'uint32'
Description	'The NumForwardPackets property indicates the number of IP packet headers allocated for the router packet queue. When all headers are in use, the router will begin to discard packets from the queue at random. This value should be at least as large as the ForwardBufferMemory value divided by the maximum IP data size of the networks connected to the router. It should be no larger than the ForwardBufferMemory value divided by 256, since at least 256 bytes of forward buffer memory are used for each packet. The optimal number of forward packets for a given ForwardBufferMemory size depends on the type of traffic carried on the network. It will lie somewhere between these two values. If the router is not enabled, this parameter is ignored and no headers are allocated. Default: 50, Valid Range: 1 - 0xFFFFFFFE.'
NumForwardPackets property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ PMTUBHDetectEnabled property
CIMTYPE	'boolean'
Description	'The PMTUBHDetectEnabled property indicates whether detection of black hole routers occurs. Setting this parameter to TRUE causes TCP to try to detect black hole routers while discovering the path of the Maximum Transmission Unit. A black hole router does not return ICMP Destination Unreachable messages when it needs to fragment an IP datagram with the Don't Fragment bit set. TCP depends on receiving these messages to perform Path MTU Discovery. With this feature enabled, TCP will try to send segments without the Don't Fragment bit set if several retransmissions of a segment go unacknowledged. If the segment is acknowledged as a result, the MSS will be decreased and the Don't Fragment bit will be set in future packets on the connection. Enabling black hole detection increases the maximum number of retransmissions performed for a given segment. The default value of this property is FALSE.'
PMTUBHDetectEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ PMTUDiscoveryEnabled property
CIMTYPE	'boolean'
Description	'The PMTUDiscoveryEnabled property indicates whether the Maximum Transmission Unit (MTU) path is discovered. Setting this parameter to TRUE causes TCP to attempt to discover the MTU (the largest packet size) over the path to a remote host. By discovering the MTU path and limiting TCP segments to this size, TCP can eliminate fragmentation at routers along the path that connect networks with different MTUs. Fragmentation adversely affects TCP throughput and network congestion. Setting this parameter to FALSE causes an MTU of 576 bytes to be used for all connections that are not to machines on the local subnet. Default: TRUE.'
PMTUDiscoveryEnabled property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ ServiceName property
CIMTYPE	'string'
Description	'The ServiceName property indicates the service name of the network adapter. This name is usually shorter than the full product name. Example: Elnkii.'
ServiceName property is in 2 classes of ROOT\CIMV2\ms_409 and in 9 namespaces

…

▲ TcpipNetbiosOptions property
CIMTYPE	'uint32'
Description	'The TcpipNetbiosOptions property specifies a bitmap of the possible settings related to NetBIOS over TCP/IP. Windows 2000 only.'
Values	['EnableNetbiosViaDhcp', 'EnableNetbios', 'DisableNetbios']
TcpipNetbiosOptions property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ TcpMaxConnectRetransmissions property
CIMTYPE	'uint32'
Description	'The TcpMaxConnectRetransmissions property indicates the number of times TCP will attempt to retransmit a Connect Request before terminating the connection. The initial retransmission timeout is 3 seconds. The retransmission timeout doubles for each attempt. Default: 3, Valid Range: 0 - 0xFFFFFFFF.'
TcpMaxConnectRetransmissions property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ TcpMaxDataRetransmissions property
CIMTYPE	'uint32'
Description	'The TcpMaxDataRetransmissions property indicates the number of times TCP will retransmit an individual data segment (non-connect segment) before terminating the connection. The retransmission timeout doubles with each successive retransmission on a connection. Default: 5, Valid Range: 0 - 0xFFFFFFFF.'
TcpMaxDataRetransmissions property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ TcpNumConnections property
CIMTYPE	'uint32'
Description	'The TcpNumConnections property indicates the maximum number of connections that TCP can have open simultaneously. Default: 0xFFFFFE, Valid Range: 0 - 0xFFFFFE.'
TcpNumConnections property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ TcpUseRFC1122UrgentPointer property
CIMTYPE	'boolean'
Description	'The TcpUseRFC1122UrgentPointer property indicates whether TCP uses the RFC 1122 specification or the mode used by Berkeley Software Design (BSD) derived systems, for urgent data. The two mechanisms interpret the urgent pointer differently and are not interoperable. Windows 2000 and Windows NT version 3.51 and higher defaults to BSD mode. If TRUE, urgent data is sent in RFC 1122 mode. Default: FALSE.'
TcpUseRFC1122UrgentPointer property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ TcpWindowSize property
CIMTYPE	'uint16'
Description	'The TcpWindowSize property contains the maximum TCP Receive Window size offered by the system. The Receive Window specifies the number of bytes a sender may transmit without receiving an acknowledgment. In general, larger receiving windows will improve performance over high delay and high bandwidth networks. For efficiency, the receiving window should be an even multiple of the TCP Maximum Segment Size (MSS). Default: Four times the maximum TCP data size or an even multiple of TCP data size rounded up to the nearest multiple of 8192. Ethernet networks default to 8760. Valid Range: 0 - 65535.'
Units	'bytes'
TcpWindowSize property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ WINSEnableLMHostsLookup property
CIMTYPE	'boolean'
Description	'The WINSEnableLMHostsLookup property indicates whether local lookup files are used. Lookup files will contain a map of IP addresses to host names. If they exist on the local system, they will be found in %SystemRoot%\system32\drivers\etc.'
WINSEnableLMHostsLookup property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ WINSHostLookupFile property
CIMTYPE	'string'
Description	'The WINSHostLookupFile property contains a path to a WINS lookup file on the local system. This file will contain a map of IP addresses to host names. If the file specified in this property is found, it will be copied to the %SystemRoot%\system32\drivers\etc folder of the local system. Valid only if the WINSEnableLMHostsLookup property is TRUE.'
WINSHostLookupFile property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ WINSPrimaryServer property
CIMTYPE	'string'
Description	'The WINSPrimaryServer property indicates the IP address for the primary WINS server. '
WINSPrimaryServer property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ WINSScopeID property
CIMTYPE	'string'
Description	'The WINSScopeID property provides a way to isolate a group of computer systems that communicate with each other only. The Scope ID is a character string value that is appended to the end of the NetBIOS name. It is used for all NetBIOS transactions over TCP/IP communications from that computer system. Computers configured with identical Scope IDs are able to communicate with this computer. TCP/IP clients with different Scope IDs disregard packets from computers with this Scope ID. Valid only when the EnableWINS method executes successfully.'
WINSScopeID property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

…

▲ WINSSecondaryServer property
CIMTYPE	'string'
Description	'The WINSSecondaryServer property indicates the IP address for the secondary WINS server. '
WINSSecondaryServer property is in 1 class (Win32_NetworkAdapterConfiguration) of ROOT\CIMV2\ms_409 and in 2 namespaces

Derived properties (3) of Win32_NetworkAdapterConfiguration class

…

▲ Caption property
CIMTYPE	'string'
Description	'A short textual description (one-line string) of the CIM_Setting object.'
Caption property is in 273 classes of ROOT\CIMV2\ms_409 and in 37 namespaces

…

▲ Description property
CIMTYPE	'string'
Description	'A textual description of the CIM_Setting object.'
Description property is in 329 classes of ROOT\CIMV2\ms_409 and in 142 namespaces

…

▲ SettingID property
CIMTYPE	'string'
Description	'The identifier by which the CIM_Setting object is known.'
SettingID property is in 36 classes of ROOT\CIMV2\ms_409 and in 10 namespaces

Win32_NetworkAdapterConfiguration Qualifiers

…

Name	Value	ToInstance	ToSubclass	Overridable	Amended	Local
AMENDMENT	True	✗	✗	✓	✗	✓
Description	'The Win32_NetworkAdapterConfiguration class represents the attributes and behaviors of a network adapter. This class has been extended to include extra properties and methods that support the management of the TCP/IPprotocols (and are independent of the network adapter).'	✗	✓	✓	✗	✓
LOCALE	1033	✓	✗	✓	✗	✓

Win32_NetworkAdapterConfiguration System properties

…

Name	Value	Origin	CIMType	Local	Array
__PATH	'\\.\ROOT\CIMV2\ms_409:Win32_NetworkAdapterConfiguration'	___SYSTEM	8	✗	✗
__NAMESPACE	'ROOT\CIMV2\ms_409'	___SYSTEM	8	✗	✗
__SERVER	'.'	___SYSTEM	8	✗	✗
__DERIVATION	['CIM_Setting']	___SYSTEM	8	✗	✓
__PROPERTY_COUNT	61	___SYSTEM	3	✗	✗
__RELPATH	'Win32_NetworkAdapterConfiguration'	___SYSTEM	8	✗	✗
__DYNASTY	'CIM_Setting'	___SYSTEM	8	✗	✗
__SUPERCLASS	'CIM_Setting'	___SYSTEM	8	✗	✗
__CLASS	'Win32_NetworkAdapterConfiguration'	___SYSTEM	8	✗	✗
__GENUS	1	___SYSTEM	3	✗	✗

Similar Classes to Win32_NetworkAdapterConfiguration

Number of classes:10

…

Class name	Properties	Class Instances	Child Instances	Abstract	Singleton
CIM_Configuration	3	-	-	-	-
CIM_ElementConfiguration	2	-	-	-	-
Win32_BootConfiguration	9	-	-	-	-
Win32_DisplayConfiguration	15	-	-	-	-
Win32_DisplayControllerConfiguration	14	-	-	-	-
Win32_OSRecoveryConfiguration	15	-	-	-	-
Win32_SerialPortConfiguration	29	-	-	-	-
Win32_SystemBootConfiguration	2	-	-	-	-
Win32_SystemConfigurationChangeEvent	3	-	-	✓	-
Win32_VideoConfiguration	30	-	-	-	-

WUtils.com

Includes&Samples

Win32_NetworkAdapterConfiguration, ROOT\CIMV2\ms_409

Description

Win32_NetworkAdapterConfiguration methods

Win32_NetworkAdapterConfiguration properties

Detailed description of Win32_NetworkAdapterConfiguration methods

Local methods (41) of Win32_NetworkAdapterConfiguration class

Detailed description of Win32_NetworkAdapterConfiguration properties

Local properties (58) of Win32_NetworkAdapterConfiguration class

Derived properties (3) of Win32_NetworkAdapterConfiguration class

Win32_NetworkAdapterConfiguration Qualifiers

Win32_NetworkAdapterConfiguration System properties

Similar Classes to Win32_NetworkAdapterConfiguration