{'Description':'Name of Routing Domain','In':True}
Force
boolean
1
✓
-
{'Description':'Switch parameter used to suppress user confirmation prompts for the following conditions. When suppressed the cmdlet assumes user confirmation for disabling Routing for the Routing Domain.','In':True}
PassThru
boolean
2
✓
-
{'Description':'If specified, returns the object or objects on which the operation was done.','In':True}
Type
uint32
3
✓
-
{'Description':'Specifies the RemoteAccess component to disable.','In':True}
{'Description':'Name of the routing domain','In':True}
IdleDisconnectSec
uint32
1
✓
-
{'Description':'A value that specifies the time, in seconds, after which an idle connection is terminated. Unless the idle time-out is disabled, the entire connection is terminated if the connection is idle for the specified interval.','In':True}
InterimAccountingPeriodSec
uint32
2
✓
-
{'Description':'Periodicity in seconds @ which interim accounting will be logged.','In':True}
IPAddressRange
string
3
✓
-
{'Description':'Indicates the IP address range from which IP addresses are allocated to VPN clients. Consists of a start IP and an end IP. This parameter can be configured only if the IPAssignmentMethod parameter is specified to be StaticPool.If there are no pre-existing IPv4 address pools (see cmdlet description for more details) then it is mandatory to specify an address range','In':True}
IPv6Prefix
string
4
✓
-
{'Description':'Specifying this parameter enables IPv6 address assignment for VPN and specifies the prefix to use for the addressing.If Null is specified, IPv6 is disabled for all connections of the tenant.','In':True}
SaLifeTimeSec
uint32
5
✓
-
{'Description':'Lifetime of a security association (SA) in seconds, after which the SA is no longer valid .','In':True}
NetBiosIPAddress
string
6
✓
-
{'Description':'Specifies the NetBios Server IP addresses for VPN clients.','In':True}
MaximumVpnConnections
uint32
7
✓
-
{'Description':'Max number of VPN connections allowed','In':True}
TenantName
string
8
✓
-
{'Description':'Specify Tenants','In':True}
PassThru
boolean
9
✓
-
{'Description':'If specified, returns the object or objects on which the operation was done.','In':True}
Force
boolean
10
✓
-
{'Description':'If specified, overrides the default confirmation before performing the operation.','In':True}
EnableQoS
uint32
11
✓
-
{'Description':'Specifies whether QoS is enabled on the interface','In':True}
TxBandwidthKbps
uint64
12
✓
-
{'Description':'Specifies Transmit bandwidth limit for the Interface in kbps.','In':True}
RxBandwidthKbps
uint64
13
✓
-
{'Description':'Specifies Receive bandwidth limit for the Interface in kbps.','In':True}
DnsIPAddress
string
14
✓
-
{'In':True}
CustomPolicy
boolean
15
✓
-
{'Description':'Specifies custom IKE IPSEC policies.','In':True}
AuthenticationTransformConstant
uint32
16
✓
-
{'Description':'Auth transform plumbed in Ipsec policy.','In':True}
CipherTransformConstant
uint32
17
✓
-
{'Description':'Cipher plumbed in Ipsec policy.','In':True}
EncryptionMethod
uint32
18
✓
-
{'Description':'Encryption Method Plumbed in IKE policy.','In':True}
IntegrityCheckMethod
uint32
19
✓
-
{'Description':'Integrity method plumbed in IPsec policy.','In':True}
PfsGroup
uint32
20
✓
-
{'Description':'PFS Group plumbed in Ipsec policy.','In':True}
SaRenegotiationDataSizeKB
uint32
21
✓
-
{'Description':'Number of Kilobytes that are allowed to transfer using a SA. After that the SA will be renegotiated ','In':True}
DHGroup
uint32
22
✓
-
{'Description':'DH Group Plumbed in Ipsec policy.','In':True}
{'Description':'Name of the routing domain','In':True}
InterimAccountingPeriodSec
uint32
1
✓
-
{'Description':'Periodicity in seconds @ which interim accounting will be logged.','In':True}
IPAddressRange
string
2
✓
-
{'Description':'Indicates the IP address range from which IP addresses are allocated to VPN clients. Consists of a start IP and an end IP. This parameter can be configured only if the IPAssignmentMethod parameter is specified to be StaticPool.If there are no pre-existing IPv4 address pools (see cmdlet description for more details) then it is mandatory to specify an address range','In':True}
IPv6Prefix
string
3
✓
-
{'Description':'Specifying this parameter enables IPv6 address assignment for VPN and specifies the prefix to use for the addressing.If Null is specified, IPv6 is disabled for all connections of the tenant.','In':True}
NetBiosIPAddress
string
4
✓
-
{'Description':'Specifies the NetBios Server IP addresses for VPN clients.','In':True}
MaximumVpnConnections
uint32
5
✓
-
{'Description':'Max number of VPN connections allowed','In':True}
TenantName
string
6
✓
-
{'Description':'Specifies Tenants','In':True}
PassThru
boolean
7
✓
-
{'Description':'If specified, returns the object or objects on which the operation was done.','In':True}
Force
boolean
8
✓
-
{'Description':'If specified, overrides the default confirmation before performing the operation.','In':True}
EnableQoS
uint32
9
✓
-
{'Description':'Specifies whether QoS is enabled on the interface','In':True}
TxBandwidthKbps
uint64
10
✓
-
{'Description':'Specifies Transmit bandwidth limit for the Interface in kbps.','In':True}
RxBandwidthKbps
uint64
11
✓
-
{'Description':'Specifies Receive bandwidth limit for the Interface in kbps.','In':True}
DnsIPAddress
string
12
✓
-
{'Description':'Specifies the DnsServer IP addresses for VPN clients','In':True}
EncryptionType
string
13
✓
-
{'Description':'Specifies the type of Encryption','In':True}